R1 has two interfaces. Gi0/0 is the gateway for a LAN and G0/1 connect to G0/1 on R2 in OSPF Area 0, which interface should be configured as an OSPF passive interface? *Last Q*
A. Int g0/0 on R2
B. Int g0/1 on R1
C. Int g0/0 on R1
D. Int g0/1 on R2
#ITProTV #CCNP #Quiztorial
#ITProTV #CCNP #Quiztorial is posted on most weekends. If you'd like to see them as they are posted, follow me here. If you're looking for more training in #Cisco, #Microsoft, #CompTIA, #CISSP and #Cybersecurity check out https://t.co/rJsh8VOKNr We have courses to help you!
Is the time for some #multicasting you will only receive this tweet if you join the #ccnpstudy and #aone #CCNP #Cisco #cbtnuggets #studytime
PEAP - Protected EAP Protocol- 802.1X
#Cisco #Security #EAP #802dot1x #networking #networks #networkengineers #thenetworkdna #networksbaseline #ccna #ccnp #ccie #security
https://t.co/yrmksSNm95
Which 2 OSPF network type requires that OSPF neighbors be configured?
A. OSPF Broadcast
B. OSPF Non-broadcast
C. OSPF Point-to-multipoint Non-broadcast
D. OSPF Point-to multipoint
#ITProTV #CCNP #Quiztorial
